Suits All Adventra models VY2 or VZ for both V6 and V8.
This is for a single rackend that will fit either the driver or passenger side off your Adventra AWD steering rack, specs are 14×1.5 inner side, 355mm length, and 16×1.5 tie rod end made by Prosteer.
If you’re going remote with your Adventra carrying a spare one of these can save you a bit of grief if you brake or bend one off-road. We use this part on our Adventra’s on our channel and have only ever replaced our factory-installed ones once per vehicle and never have had to replace it again.
Only takes around 20-30 minutes a side to change if you’re handy, does require a wheel alignment after completed.
