Prosteer Rack End For Holden Adventra V6 V8 VZ or VY2$50.00 incl. GST
Availability:
In Stock 🥳 Available in-store or by online order.
Prosteer Rack End For Holden Adventra V6 V8 VZ or VY2
Suits All Adventra models VY2 or VZ for both V6 and V8.
This is for a single rackend that will fit either the driver or passenger side off your Adventra AWD steering rack, specs are 14×1.5 inner side, 355mm length, and 16×1.5 tie rod end.
$50.00 incl. GST
incl. GSTSuits All Adventra models VY2 or VZ for both V6 and V8.
This is for a single rackend that will fit either the driver or passenger side off your Adventra AWD steering rack, specs are 14×1.5 inner side, 355mm length, and 16×1.5 tie rod end made by Prosteer.
If you’re going remote with your Adventra carrying a spare one of these can save you a bit of grief if you brake or bend one off-road. We use this part on our Adventra’s on our channel and have only ever replaced our factory-installed ones once per vehicle and never have had to replace it again.
Only takes around 20-30 minutes a side to change if you’re handy, does require a wheel alignment after completed.
